We have recently designed, fabricated and supplied a Dextrose Misting Unit.
6th February 2018
Extraction / ventilation duct
29th January 2018
Styne’s latest install, a 5.5m double width, stainless steel staircase was installed last weekend. Tasked with the removal of an old non-compliant staircase, the Styne team designed, fabricated and installed this new structure to comply with BS-EN1090 requirements and meet the hygiene standards of a food production facility. Pictures before and after install.
21st December 2017
We would like to wish all our customers and suppliers a very Happy Christmas!!!
Over the festive period, our offices will be closed during the following dates: Friday 22nd December 1pm until Tuesday 2nd January at 8am.
If during this period you need emergency assistance, contact the on-call number on 07841 447401 (call-out fees apply).
15th December 2017
A fabrication and balancing of a 16” 3500rpm Impeller
5th December 2017
We are happy to welcome Haydon to the team as an Electrical Mechanical Engineer. Haydon has 6 years experience working in a factory/industrial environment meaning Styne can now offer assistance with cover for both electrical and mechanical maintenance cover. Please call us if we can help you…………
20th November 2017
We’ve recently designed and installed a conveyor for a local poultry processing company.
23rd October 2017
We have recently designed, fabricated and installed a module wash conveyor and pump system for a local poultry processing company.
Tom Schofield has been appointment into the position of Operations Manager, having worked in our offices for the past 18 months. He will have the day to day responsibility of organising labour and customer liaison.
14th September 2017
We are very pleased to add a new transit custom van to our fleet. Thank you to Coastline Graphics for the signwriting!
7th September 2017
Styne were recently commissioned to design a conveyor for the bunching and uniform trimming of fresh herbs. The customer requested a hygienic design from stainless steel. The conveyor had to work with a bander that the customer had purchased. Our design team worked closely with the customer to create a conveyor that fit their space requirements, bunched and trimmed 42 bunches of fresh coriander per minute.
24th August 2017
We’ve been busy providing steel fabrication and installation of a lifting hoist for a local printing company.
20th July 2017
James Rolf has joined us as Compliance Manager. He will help us to start working towards our ISO 9001 accreditation. Welcome James!
20th July 2017
Keith Read has recently joined us as a permanent member of staff as Site Supervisor. Welcome to the team Keith!
22nd June 2017
Styne has regained its accreditation once again for Safe Contractor, proving both companies are meeting with current Health and Safety Standards.
7th June 2017
An example of ‘tube rolling’ for a local customer, providing the structure for a poultry shed.
Its our 5th Anniversary!!!! Thank you to all our loyal customers over the past 5 years and thank you to all our staff for your hard work and dedication to our company. Well done Jason Bartrum for winning the celebratory pool tournament!!
10th May 2017
We have a new addition to our drawing team. Colin Rees has recently joined us following years of experience in the trade. Welcome to the team Colin!
8th March 2017
We are delighted Steve Cumbers has accepted the position of General Manager after stepping into the post. Steve is an asset to our team and we congratulate him on his promotion.
22nd February 2017
We have recently taken on a new employee, Kevin Pittock as a Welder/Fabricator. Kevin has worked in the field for many years and we welcome his experience and expertise to our team.
Congratulations to 2 of our staff members, Lewis Erith for achieving your EAL Level 3 Extended Diploma in Fabrication and Welding Engineering and to Howard Preston-Bloom for gaining your Certificate of Higher Education in Engineering.
16th November 2016
Miles is our latest new apprentice. He is going to study for his Diploma in Fabrication and Welding at West Suffolk College. Welcome on board Miles!
Our new mobile works unit has been picked up this morning and is on its way to a major project we have in Scunthorpe.
We are pleased to have a new apprentice on board. Alex has joined us to study a Diploma in Fabrication and Welding at West Suffolk College. Here he is pictured with Jake, our apprentice of a year, also studying for his Diploma at West Suffolk College.
We are excited to have recently received our new mobile works unit! This will enable us to work on all sites around the UK.
We are pleased to announce that Lewis Erith has successfully completed his EAL Level 3 Diploma in Fabrication and Welding Engineering Technology. Well done Lewis!
Lewis Erith our apprentice doing a West Suffolk College Welding course was in the spotlight after building a 2 metre cage for a national book launch.
He made the cage for the launch of Half Bad, the new novel by Sally Green. The story is set in a fantasy modern-day England, where witches live alongside humans. Fifteen-year-old Nathan, son of the most powerful and cruel Black witch, is locked up in a cage by White witches, and the cage was a centrepiece of the book launch which took place on the top floor of Shoreditch House in London.
The cage will become the focal point of the National launch of HalfBad, set to take place in Waterstones flagship store in central London, but also at the Bologna Children’s book fair.
Lewis is set to progress onto an Advanced Apprenticeship with us in 2014.